Handleiding
Je bekijkt pagina 11 van 26
11
REMOTE CONTROL
NOTE: The design of the remote may vary from the diagram due to
continuous product improvement.
MULTI PROTECTIVE FUNCTIONS
FROST PROTECTION
In COOL, DRY or AUTO modes, if the temperature of the exhaust is too low, the machine will automatically stop
operating until the temperature has risen.
OVERFLOW PROTECTION
When the water in the internal water tank exceeds the warning level, the machine will stop operating and sound
an alarm with the LCD showing “E4”. To resume operation, empty the internal water tank. After emptying the
water, the machine will automatically return to its original state.
AUTO-DEFROST
The machine has an automatic defrosting function. If the internal coils' temperature drops too low during
operation, the unit will enter auto defrost, and the heating symbol will flash on the control panel.
AUTOMATIC THERMAL PROTECTION
To protect the machine's service life, the machine has automatic thermal protection. If the temperature within
the unit is outside of the specified range, the compressor and the lower motor will stop operation. After the
machine's temperature recovers, the appliance will automatically return to regular operation.
COMPRESSOR PROTECTION
There is a 3-minute delay start protection function to prevent damage to the compressor.
POWER
Press to turn the unit on or off.
TEMP -
Press to decrease the desired temperature or
timer duration.
TEMP +
Press to increase the desired temperature or
timer duration.
SPEED
Press to change between the three fan speeds.
SLEEP
Press the sleep button to enter sleep mode.
MODE
Press to change between Auto, Cool, Heat and
Fan modes.
Bekijk gratis de handleiding van ElectriQ P12HPW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | P12HPW |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2442 MB |
