Handleiding
Je bekijkt pagina 12 van 26
12
EMPTYING THE INTERNAL WATER TANK
MANUAL DRAINAGE:
When the internal water tank is full, the unit will stop working.
Shut off the unit and unplug it. Avoid moving the model abruptly, as this
may cause the water in the internal tank to spill out.
Place a tray in a drainage area under the lower water plug or the unit.
Unscrew the drain plug cap and remove the rubber stopper - water will
drain from the internal tank. Put the rubber stopper back and screw the
drain plug cap back into place.
CONTINUOUS DRAINAGE:
Unscrew the drain plug cap and remove the rubber stopper.
Connect a water pipe to the upper water outlet.
You can plumb this pipe into your current plumbing system, lead it
outside, use gravity fall, or use a water pump.
NOTE:
• This model has a self-evaporative function, which reduces the need to empty the water tank. If the unit
is vented correctly, most water is reused to cool the condenser coils, and any excess is evaporated.
Please do not use continuous drainage if you intend to use the self-evaporating facility.
• When using the unit in heating mode, it is advisable to use continuous drainage.
Bekijk gratis de handleiding van ElectriQ P12HPW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | ElectriQ |
| Model | P12HPW |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 2442 MB |
