Elation Power Spot 250 handleiding
Handleiding
Je bekijkt pagina 15 van 48
Power Spot 250™
©Elation Professionals® Los Angeles, Ca. - wwww.ElationLighting.com - Page 15
2.8 5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR connectors
for DATA transmission in place of 3-pin. 5-pin XLR fixtures may be implemented in a
3-pin XLR DMX line. When inserting standard 5-pin XLR connectors in to a 3-pin line
a cable adaptor must be used, these adaptors are readily available at most electric
stores. The chart below details a proper cable conversion.
2.9 Fuse Requirements
The POWER SPOT 250’s electronic system is protected by a 5x20 mm external fuse.
115V / T 6.3A (US model) or 230V / T 3.15A (EU model).
The fuse requirements are clearly printed on the side of the fixture.
WARNING:
• Always disconnect main power before changing the fuse!
• Always replace with the exact same type fuse unless otherwise specified by
an authorized Elation® service technician. Replacing with anything other than
the specified part can severely damage your fixture and will void your
manufactures warranty.
2.10 Transportation and Handling
The POWER SPOT 250™ comes with two carrying handles built into the base. Always
transport the fixture by these handles. Never lift or carry the POWER SPOT 250™ by
the yoke (head assembly) this can seriously damage the unit.
Bekijk gratis de handleiding van Elation Power Spot 250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elation |
| Model | Power Spot 250 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4681 MB |
