Ekko ER15L handleiding
Handleiding
Je bekijkt pagina 18 van 31
13
Turn the inserted key to the “open “position(Figure 8),Then pull up the emergency stop
switch (Figure 7.4), to start the car .Move the handle to the operating area（‘F’）。
Turn the accelerator button to the forward direction‘Fw”or backward direction‘Bw’
(Figure 10)
Control the driving speed by carefully moving the button (fig.7.8)until reach your desired
speed .
If you move the accelerator button back to the middle position, the controller will slow down
the truck until it stops. If the truck stops, the parking brake starts to work.
Drive the car carefully to the destination, Observe the road situation and adjust the speed
with the travel switch button
8.8Steering
The car with EPS steering system, Be careful when operating.
Steering the car by turning the handle to the left or the right
8.9Braking
Braking performance depends on road conditions and the loading conditions of
car
The brake function can be activated in the following ways :
⚫ By moving the accelerator (figure 7.8) to the “0)position or release the button, Regenerative
braking is activated and the car brakes until it stops .
⚫ By moving the accelerator (figure 7.8) directly from the drive direction to the opposite
direction., the car regenerates braking until it starts driving in the opposite direction
！
Figure 10 Operating
Direction
Bekijk gratis de handleiding van Ekko ER15L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ekko |
| Model | ER15L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4589 MB |
