Eizo DuraVision SGX0031 handleiding
Handleiding
Je bekijkt pagina 57 van 67
Live Image Screen (Screen Streamed in Merge Mode) Settings | 6
57
Sync timestamp
This feature applies only to video streams received via RTSP or RTP.
If "Enable" is checked, the live stream will be displayed according to the time stamp
received from the camera. Display stuttering may be improved, but the following issues
occur. By default, "Enable" is not checked.
• Increasing the delay time (buffering time) improves display stability but increases display
delay. Reducing the delay time setting shortens display delay but may result in unstable
display.
• Increased CPU load may lead to reduced performance, such as a decrease in the frame
rate that can be displayed.
Latency [0-1000 ms]
The delay time for "Sync timestamp" can be set from 0 to 1000 ms.
Network traffic condition
If you check "Enable," the data reception and network status can be checked by the color of
the circle displayed in the upper right of the screen. By default, "Enable" is not checked.
• Black
Default status
• Red
Packet lost detection
• Yellow
No packets received for a certain period of time
• Gray
Frame rate drops due to high load
• Green
Normal reception of 30 frames or higher
RTP receive port restrictions
When "Enable" is checked, the "RTP receive port range" setting becomes active, and the
range of receive ports is restricted. By default, "Enable" is not checked.
RTP receive port range
Settings: "1024" to "65535"
Specifies the range of RTP receive ports (UDP) used after RTSP communication begins.
Bekijk gratis de handleiding van Eizo DuraVision SGX0031, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision SGX0031 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4927 MB |
