Eizo DuraVision SGX0031 handleiding
Handleiding
Je bekijkt pagina 56 van 67
6 | Live Image Screen (Screen Streamed in Merge Mode) Settings
56
6.11 Configuring Advanced Settings for Camera Videos
Configure advanced settings for displaying camera video on the live image screen.
Normally, there is no need to change these settings.
Attention
• Changing the settings may cause the display to function improperly.
1. Select "Live Image Screen" > "Advanced."
2. Set each item.
– "B Frame Decode Buffer" (B Frame Decode Buffer [}56])
– "Suspend while in Background" (Suspend while in Background [}56])
– "Instant camera switch" (Instant camera switch [}56])
– "Sync timestamp" (Sync timestamp [}57])
– "Latency [0-1000 ms]" (Latency [0-1000 ms] [}57])
– "Network traffic condition" (Network traffic condition [}57])
– "RTP receive port restrictions" (RTP receive port restrictions [}57])
– "RTP receive port range" (RTP receive port range [}57])
3. Click "Apply."
B Frame Decode Buffer
When "Enable" is checked, streams containing B-frames can be displayed, but the following
issues occur. By default, "Enable" is not checked.
• The display of camera images is delayed.
• Video with a low frame rate such as 1 fps may not be displayed.
Suspend while in Background
When "Enable" is checked, only communication with the camera displayed on the live image
screen is maintained, and communication with the non-displayed cameras is disconnected
each time. Communication with the camera can be minimized, but the following issues
occur. By default, "Enable" is not checked.
• Since communication with the camera starts when the display starts, it takes time for the
camera image to be displayed.
Instant camera switch
If you check "Enable," decoding for cameras that are not displayed is maintained, reducing
the time until camera images appear when switching pages. However, the following
restrictions apply. By default, "Enable" is not checked.
• Up to 32 cameras can be displayed (communication fails after the 33rd).
• If the "Suspend while in Background" function is enabled, this function is disabled (the
"Suspend while in Background" function takes priority).
Bekijk gratis de handleiding van Eizo DuraVision SGX0031, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision SGX0031 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4927 MB |
