Eizo DuraVision SGX0031 handleiding
Handleiding
Je bekijkt pagina 16 van 67
4 | System Settings
16
4.2.1 Network
IP Setting Method
Settings: "DHCP" / "Manual"
Select the IP address setting method.
Note
• If you have a DHCP server, select "DHCP" and the IP address will be set automatically. The IP
address assigned by DHCP will not be displayed, so check it with a network scan tool.
IP Address
Settings: "0.0.0.1" to "255.255.255.254"
Set an IP address that does not overlap with another device.
Note
• The default IP address is "192.168.0.150." When installing multiple units of this product, IP
decoding boxes, or IP monitors, set unique IP addresses.
Subnet Mask
Settings: "0.0.0.1" to "255.255.255.254"
Set the subnet mask.
Gateway
Settings: "0.0.0.1" to "255.255.255.254"
Set the default gateway.
If your network environment does not have a gateway, you do not need to set "Gateway."
Leave either as default setting or blank.
4.2.2 DNS
DNS
Settings: "Auto" / "Manual"
Set "DNS." (only if "Network" > "IP Setting Method" is set to "Manual")
Primary Server Address
Settings: "0.0.0.1" to "255.255.255.254"
If "DNS" is set to "Manual," set the "Primary Server Address."
Secondary Server Address
Settings: "0.0.0.1" to "255.255.255.254"
If "DNS" is set to "Manual," set the "Secondary Server Address."
4.2.3 NTP
NTP
When using an NTP server, check "Enable."
Bekijk gratis de handleiding van Eizo DuraVision SGX0031, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eizo |
| Model | DuraVision SGX0031 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4927 MB |
