Eizo ColorEdge ColorNavigator 7 Handleiding (99 Pagina's)

Handleiding

49

Chapter 3 Basic Usage

Management Policy Selection

Item Function overview

Periodic calibration Enable

SelfCalibration

Adjusts the monitor periodically by using ColorNavigator 7.

If your monitor has a built-in sensor, SelfCalibration/

SelfCorrection are available.

If your monitor does not have a built-in sensor, ColorNavigator 7

will notify you of the timing of calibration.

Enable

SelfCorrection

None Periodic calibration is not performed.

Note

• SelfCalibration and SelfCorrection are functions designed to maintain the state adjusted by ColorNavigator 7.

The ICC prole is not updated. When the ICC prole needs to be updated, use ColorNavigator 7 to make the

adjustments.

• For the Advanced (ADV) color mode type, use ColorNavigator 7 and perform adjustments in advance.

Check Period Setting

Set a check period of the periodic calibration.

Item Function overview

Usage time This is the setting based on the hours that the monitor was actually used.

When the monitor usage time reaches the setting value, the next periodic calibration

will execute.

Date This is the setting based on the elapsed time.

This allows you to set a period until the next periodic calibration executes.

Start Timing

Item Function overview

Do not execute

SelfCalibration while the

monitor is in use

When this checkbox is selected, SelfCalibration will not execute while the monitor

is in use.

SelfCalibration starts when the monitor shifts to the power-saving mode.

Resetting Setting

Resets the management policy setting to default.

Bekijk gratis de handleiding van Eizo ColorEdge ColorNavigator 7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.