Eibenstock EPO 200-3 R NT handleiding
Handleiding
Je bekijkt pagina 17 van 64
17
Switching on and off
Note:
For safety reasons, the on/off switch cannot be locked; it must remain
pressed during the entire operation. To switch off the power tool, release
the on/off switch. The EPO 200-3 R NT has an adjusting wheel with which
the speed can be can be continuously adjusted between 2000 and 3000
rpm. This is located on the switch handle.
Tool assembly and replacement
Attention!
Before any work on the tool, disconnect the plug from the mains!
Activate the spindle lock and keep it pressed.
First fit the Velcro discs to the work spindle. Screw them on and tighten
them firmly. Use the spindle lock to hold them in place.
Press the grinding or polishing discs required
for your application onto the hook and loop
backing pads. Ensure that the disc is positioned
as precisely as possible on the backing pad.
This enables the device to run smoothly.
Let the machine run for a short period of time and in a safe position. If the
machine does not run easily, stop working immediately.
Working instructions
Dry polishing:
Dust generated during work is harmful to health. When Therefore, a
hoover must be used when sanding / polishing and wear a dust mask.
The appropriate wet/dry vacuum cleaner (dust class M) is available as an
accessory. This is connected directly to the socket provided on the
extraction hood. suction bonnet.
To start the power tool, first press the lock-off
button(1), then press the on/off switch (2) and
keep it pressed.
1
2
Bekijk gratis de handleiding van Eibenstock EPO 200-3 R NT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | EPO 200-3 R NT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6520 MB |
