Eibenstock BST 90 handleiding
Handleiding
Je bekijkt pagina 17 van 23
16
The drill spindle has a right-hand thread.
To hold on spindle always use an jaw wrench SW 32.
Never remove the drill bit with impacts because this way the machine will be
damaged.
With some waterproof grease, which is put on the drill bit thread, and a copper
ring between spindle and drill bit you can remove the drill bit easier.
If the drill bit is not cooled enough with water, the diamond segments could
heat up and consequently get damaged and weakened. For this reason,
always make sure that the cooling system is not blocked.
In order to supply the machine with water, please proceed as follows:
▪ Connect the tool to the water supply system or a water pressure vessel
using the GARDENA connector.
▪ Always make sure that the machine only runs with enough clear water as
the seals get damaged when the machine is running dry.
▪ Attention! The maximum water pressure should not exceed 3 bar!
▪ Make sure that the segments are well cooled. If the drilling water is clear,
the segments are well cooled.
▪ Overhead-drilling only with water collection ring.
▪ In case of frost warning, drain the water system.
In order to operate the tool safely, please observe the following notes:
Details of the work area
▪ Keep the work area free of everything which could obstruct operations.
▪ Provide for adequate illumination of the work area.
▪ Adhere to the regulations concerning the power connection.
▪ Lay the power cable in such a way that any damage by the drill can be
avoided.
▪ Make sure to always keep the work area in view and to be able to reach all
necessary operating elements and safety installations.
▪ Keep other persons away from your work area in order to avoid accidents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of about 2
m around the drill position, so that you can work safely and have immediate
access in case of a failure.
Water Connection
Operations
Bekijk gratis de handleiding van Eibenstock BST 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2841 MB |
