Eibenstock BST 90 handleiding
Handleiding
Je bekijkt pagina 16 van 23
15
Wear protective gloves!
Caution! When mounting the machine, risk of squashing.
▪ Move the machine holder (2)
upwards until the locking pin (5)
locks in the column.
▪ Remove both Allen screws M8 (3)
and take off the clamp (4).
.
▪ Put the core drill (M) on the carriage and
close the clamp (4) by means of the
Allen screws (3).
Attention!
The machine is heavy and when you use or sharpen it,
it might heat up enormously. You could burn your
hands or get cut or ripped by the segments. Before the
beginning of all works on the tool you have to
disconnect the plug from the mains. Always use
protective gloves when changing the drill bit.
Drill Bit Changing
Fixing the Core Drill Motor
Bekijk gratis de handleiding van Eibenstock BST 90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2841 MB |
