Eibenstock BST 352 V handleiding
Handleiding
Je bekijkt pagina 19 van 112
19
Operations
In order to operate the tool safely, please observe the following notes:
Details of the work area
▪ Keep the work area free of everything which could obstruct operations.
▪ Provide for adequate illumination of the work area.
▪ Adhere to the regulations concerning the power connection.
▪ Lay the power cable in such a way that any damage by the drill can be
avoided.
▪ Make sure to always keep the work area in view and to be able to reach
all necessary operating elements and safety installations.
▪ Keep other persons away from your work area in order to avoid accidents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of
about 2 m around the drill position, so that you can work safely and have
immediate access in case of a failure.
Drilling
At the beginning, drill very slowly, since the drill bit does only starts cutting
with a fraction of the cut surface in the material. If you drill too fast or with too
much pressure, the drill bit could get jammed.
Angled drilling
▪ Remove the screw (1) that locks the column
at 90°.
▪ If necessary, loosen the two screws (2) on
the side of the base plate.
▪ Use the feed lever to release the lock (3) on
the support.
▪ Now swivel the column to the desired angle.
The scale on the tooth column makes it easier
for you to set the drilling angle.
Drilling with Water
Bekijk gratis de handleiding van Eibenstock BST 352 V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 352 V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20311 MB |
