Eibenstock BST 352 V handleiding
Handleiding
Je bekijkt pagina 18 van 112
18
Caution! When mounting the machine, risk of squashing.
Wear protective gloves!
Assembly of the machine plate
Move the machine holder upwards until it
locks into place.
Use the feed lever to open the mounting plate
lock.
Remove it and connect it to the core drilling
machine as described below.
The scope of delivery includes a mounting
plate, a 10 mm key and 4 M8 x 25 hexagon
socket screws.
The mounting plate is placed on the machine
with the key so that the bushings in the
mounting plate are on the same side as the
gear shift of the machine. Then insert the four
screws and tighten them securely.
Insert the core drilling machine with the
mounted plate into the drill stand and lock it in
place using the feed lever.
For the operation of the core drill, its operating instruc-
tions and safety advices have to be strictly observed!
Unlocking the slide:
To unlock the carriage (1), pull out the
locking button (2).
To lock the carriage, move it until the lo-
cking shaft passes through the hole in
the column and locks into place.
Always lock the carriage when the as-
sembly is not in use.
Bekijk gratis de handleiding van Eibenstock BST 352 V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 352 V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20311 MB |
