Eibenstock BST 352 V handleiding
Handleiding
Je bekijkt pagina 17 van 112
17
Please note that the levelling screws are adjusted so that they do not protrude
from the underside of the drill stand base, as this will affect the vacuum and
the stand may come loose from the surface.
When using vacuum mounting, ensure that the vacuum is sufficiently high
(min. – 0.8 bar). Make sure that the seals are not worn.
Connect the drill stand and the vacuum pump using the vacuum hose.
Move the drill stand into the correct position, open the ball valve on the con-
nection plate and switch on the pump.
The vacuum pump must continue to run throughout the entire working
time and must be positioned so that you can see the pressure gauge.
Be sure to check that it is securely fastened before you start drilling!
To release the vacuum attachment, close
the ball valve. This opens a vent valve
through which the vacuum can escape.
This allows the stand to be moved while
the vacuum pump is running, if necessary.
Fastening with quick-release column
To brace the drill stand using the quick-release column, the distance to
the opposite wall must be between 1.7 m and 3 m.
Position the drill stand. Place the quick-release column
as close as possible behind the column on the stand
base. Secure the drill stand by turning the crank (G) clo-
ckwise. Secure the setting with the corresponding bolt
(H).
Caution!
It is important that the drill stand is firmly secured to the ground. Incor-
rectly secured drill stands can cause injury to the operator and damage
to the drilling unit. Movement during drilling causes the drill bit to strike
the borehole wall, which can lead to the segments breaking off. The drill
bit can also become jammed in the borehole, causing damage to it.
Fixing the Core Drill Motor
Bekijk gratis de handleiding van Eibenstock BST 352 V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 352 V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20311 MB |
