Eibenstock BST 162 H handleiding
Handleiding
Je bekijkt pagina 16 van 36
15
Fixing the core drill motor
Wear protective gloves!
Caution! When mounting the
machine, risk of squashing!
Mounting the core drill machine
Move the machine holder far up and fix it by tightening the screw (1).
Using the feed lever (2), loosen the clamping screw and open the clamp.
Dismantle the additional handle of the machine beforehand.
Place the core drill in the holder and close the clamp using the clamping screw.
Loosen the screw (1) before drilling.
Always lock the carriage when the assembly is not in use.
For operation with the core drill machine you have to attend
the operating instructions and the safety indications!
Operations
In order to operate the tool safely, please observe the following notes:
Details of the work area
Keep the work area free of everything which could obstruct operations.
Provide for adequate illumination of the work area.
Adhere to the regulations concerning the power connection.
Lay the power cable in such a way that any damage by the drill can be
avoided.
Make sure to always keep the work area in view and to be able to reach all
necessary operating elements and safety installations.
Keep other persons away from your work area in order to avoid accidents.
Space requirements for operating and maintenance
Whenever possible, keep a free space for operating and maintenance of about
2 m around the drill position, so that you can work safely and have immediate
access in case of a failure.
1
2
Bekijk gratis de handleiding van Eibenstock BST 162 H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eibenstock |
| Model | BST 162 H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7064 MB |
