Ecoteck Libera handleiding
Handleiding
Je bekijkt pagina 8 van 48
Use and maintenance manual, model “LIBERA 8 V/C - LIBERA 11 V/C”
ENGLISH
8
addition of binding substances (max. bark
percentage: 5%);
• packaging: bags made of eco-compatible or
bio-decomposable material.
For the products in the range, the Manufacturer
prescribes the use of certied class A1 fuel, in
compliance with EN ISO 17225-2:2014, DIN PLUS
certicate (which is more restrictive than class A1),
or else O-NORM M7135.
Pellets must be stored in a dry environment, not
excessively cold. It is also advisable to keep some
pellet bags (in any case not exceeding 1.5m
3
) in
the room where the product is used, so as to allow
any moisture to dry out.
Neglecting this aspect will result in lower efciency
of the fuel and, as a consequence, more
maintenance to be carried out.
WOOD
For the products in the range, the Manufacturer
prescribes the use of certied class A1+ or A1
fuel, in compliance with UNI EN ISO 17225-5:2014
standard.
Allowed fuels: wood logs. Only dry wood logs
(max. water content: 20%) must be used.
It is recommended to use long-lasting essences
such as beech, oak or elm. Avoid very aromatic
essences or essences with high content of resin
(myrtaceae, eucalyptus, pine, r) which can
cause problems, even serious ones, to the product.
When choosing the size of the wood to be
purchased, refer to the dimensions of the
combustion chamber. For further information, see
the chapter dedicated to wood loading, ignition
and product operation.
Suggested fuel: BEECHWOOD
• caloric value: about 4.6 kWh/kg;
• ideal humidity level: from 15% to 20%;
The wood must be stored in a dry and not
excessively cold environment. It is also advisable
to keep a quantity of wood logs sufcient for 2/3
days of operation in the room where the product
is used, so as to allow any moisture present to
dry out. Neglecting this aspect will result in lower
efciency of the fuel and, as a consequence,
more maintenance to be carried out.
Should you decide to use pressed logs, be careful,
as they have a high caloric value, which can
damage the product by overheating.
Prohibited fuels
We recommend not to use the following fuels, as
they could be harmful to health and environment,
thus invalidating the warranty:
• very damp wood
• treated wood (chipboard, lacquered,
varnished, glued, etc.)
• treated paper and cardboard (varnished,
oiled, impregnated kitchen paper, etc.)
• woodworking residues, such as shavings and/
or sawdust
• liquid fuels
• coal and other fossil derivatives
• rubbish, plastic and/or - more generally -
anything that releases toxic and polluting
substances through combustion.
• Fruit pits, pomace, corn, shells, mixtures of
the above with wood pellets, pellets NOT
produced with sawdust only.
3 INSTALLATION
Installation and use must take place in
compliance with all the respective ISO, EN, UNI
reference standards in force and pursuant local
and national laws.
Product installation and its connection to both the
ue and heating systems must be carried out by
a qualied technician, according to the laws in
force (in Italy, e.g., see Ministerial Decree 37/08
and subsequent amendments, and Legislative
Decree 28/11 and subsequent amendments).
The manufacturer is not liable for any claim for
compensation for damages due to installation
which does not comply with the technical
standards and all the legislative provisions in
force, or for installation carried out non-competent
and non-authorized persons, as indicated in the
previous paragraph.
3.1 INSTALLATION ROOM
• Product position (before assembly) must be
chosen according to the following: installation
environment; presence of a suitable ue or its
possibility to build one; presence of a compliant
electrical system; according to the presence of
an aeraulic or hydraulic system (if applicable); the
possibility to have direct, indirect ventilation or air
ducting (if applicable).
• The room must be suitable for installation (see also
the technical standards in force, e.g., UNI10683).
It must not be: a room exposed to the risk of
re, a potentially dangerous room, a deposit of
combustible material, a non-heatable room
(should the appliance heat the installation room).
• Evaluate the attic/oor capacity before placing
the product. If the existing construction does not
meet this requirement, appropriate measures
Bekijk gratis de handleiding van Ecoteck Libera, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecoteck |
| Model | Libera |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9584 MB |
