Ecler VEO-XTT44 handleiding
Handleiding
Je bekijkt pagina 11 van 20
11
ARC MODE
The front panel of receiver provides a button to enable or disable ARC mode, as below
figure shows:
Press the button with paper clip or other pointed tool to enable the ARC mode: the left
LED illuminates blue. Press it again to exit the ARC mode and the LED is off.
ARC Mode
Display (e.g.TV)
Audio Transmission Path
ON
ARC is supported.
The TV audio is transmitted from the TV
back to the receiver via HDMI cable, and
then it will be output by the ARC Audio
Out port of transmitter.
ARC is not
supported.
Connect the TV to the ARC Audio In port
of receiver with an optic audio cable. The
TV audio is transmitted from the TV back
to the receiver via the audio cable, and
then it will be output by the ARC Audio
Out port of transmitter.
Note that if the ARC mode is ON, the
Audio Breakout port of receiver has no
audio output.
OFF
/
The TV audio can’t be back to the ARC
Audio Out port of transmitter. The Audio
Breakout port of receiver is connected to
speaker or amplifier for HDMI source
audio de-embedding.
Bekijk gratis de handleiding van Ecler VEO-XTT44, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XTT44 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2400 MB |
