Ecler VEO-XPT412 handleiding
Handleiding
Je bekijkt pagina 8 van 14
8
PRECAUTIONS
WARRANTY
&
ENVIRONMENT
DESCRIPTION
&
FEATURES
PANEL
FUNCTIONS
INSTALL
&
CONNECT
TECHNICAL
DATA
PACKAGE
CONTENTS
5.2 Receiver: Front and Rear Panel
1. POWER LED: This LED will be lit
when the receiver is power supplied.
2. SERVICE: Micro-USB port for
firmware upgrade and user-defined
EDID upload.
3. DC 24V port: Connect to this port the
24Vdc included power supply.
4. HDBT IN: HDBaseT Input signal.
Connect it to the HDBaseT
transmitter output port using a Cat 5e
or higher cable. Only point-to-point
connections are allowed.
5. AUDIO OUT: Stereo unbalanced
audio extraction.
6. HDMI
OUT: HDMI
output. Connect
it to the end device (e.g. TV screen).
7. IR IN: 3.5mm jack to connect the IR
receiver for IR pass-through.
8. IR OUT: Connect it to the included IR
Blaster for extending an IR signal
from the display to the source.
9. RS-232 port: 3-pin terminal block to
connect the RS-232 control device
(e.g. PC) or a third-party device to be
controlled.
Bekijk gratis de handleiding van Ecler VEO-XPT412, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XPT412 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2162 MB |
