Ecler VEO-XPT412 handleiding
Handleiding
Je bekijkt pagina 7 van 14
7
PRECAUTIONS
WARRANTY
&
ENVIRONMENT
DESCRIPTION
&
FEATURES
PANEL
FUNCTIONS
INSTALL
&
CONNECT
TECHNICAL
DATA
PACKAGE
CONTENTS
5. PANEL FUNCTIONS
5.1 Transmitter: Front and Rear Panel
1. POWER LED: This LED will be lit
when the transmitter is power
supplied.
2. SERVICE: Micro-USB port for
firmware upgrade and user-defined
EDID upload.
3. DC 24V port: Connect to this port the
24Vdc included power supply.
4. HDBT OUT: HDBaseT Output signal.
Connect it to the HDBaseT receiver
input port using a Cat 5e or higher
cable. Only point-to-point
connections are allowed.
5. AUDIO OUT: Stereo unbalanced
audio extraction.
6. HDMI
IN: HDMI
input.
7. IR IN: 3.5mm jack to connect the IR
receiver for IR pass-through.
8. IR OUT: Connect it to the included IR
Blaster for extending an IR signal
from the display to the source.
9. RS-232 port: 3-pin terminal block to
connect the RS232 control device
(e.g. PC) or a third-party device to be
controlled.
Bekijk gratis de handleiding van Ecler VEO-XPT412, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ecler |
| Model | VEO-XPT412 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2162 MB |
