Easymaxx 16458 handleiding
Handleiding
Je bekijkt pagina 3 van 4
EN Operating Instructions
Dear Customer,
We are delighted that you have chosen our EASYmaxx alcohol tester. If
you have any questions, contact the customer service department via our
website: www.ds-group.de/kundenservice
Be aware that consuming alcohol always has a negative impact on your
ability to react and judge situations! Even if the product indicates zero
or a low value after you have consumed alcohol, you must not drive a
vehicle, operate machinery or perform any action that may pose a risk
to yourself or others!
IMPORTANT NOTICES
■ The product measures the approximate alcohol concentration in your
breath and calculates the approximate blood alcohol concentration from
this. None of the values measured are guaranteed.
■ The alcohol tester cannot be used with legal force to establish
whether a person who has consumed alcohol may drive a vehicle,
operate machinery or perform any other action that may pose
arisk to themselves or others when they are under the influence
of alcohol.
■ The road trac regulations in the particular country in which the user
is located must be followed and complied with. However, we wish to
explicitly point out that the results which are displayed by the
alcohol tester do not give any indication of whether the user’s
blood alcohol level is within the legally prescribed alcohol limits
for driving on the road.
■ Keep the product and the packaging material away from children and
animals. There is a danger of suffocation.
■ Do not blow any cigarette smoke onto the sensor.
■ Batteries can be deadly if swallowed. Batteries and the product should
be kept out of the reach of children and animals. If a battery is swal-
lowed, immediate medical attention must be sought. Danger of burns
from battery acid!
■ If a battery has leaked, do not allow your skin, eyes and mucous mem-
branes to come into contact with the battery acid. If you touch battery
acid, rinse the affected areas with abundant fresh water straight away
and seek medical attention immediately. Danger of burns from battery
acid!
■ Use only the battery type specified in the technical data (see “Technical
Data”).
■ Always replace all batteries together. Do not use batteries of different
types or brands, or batteries with different capacities. When replacing
batteries, ensure the correct polarity (+ / –).
■ Take the batteries out of the battery compartment when they are dead
or if you will not be using the product for a prolonged period. This will
prevent any damage that might occur if a battery leaks.
■ Remove a leaking battery immediately.
■ Batteries must not be charged or reactivated in any way, disassembled,
thrown into a fire, immersed in liquids or short-circuited.
■ Protect the product from flames and heat sources, sub-zero temperatures,
persistent moisture, wet conditions and impacts.
■ If the product is broken, do not attempt to repair it yourself, but contact
the customer service department.
■ The product is designed for personal use only and is not intended for
commercial applications. Use the product only for the intended purpose
and as described in the operating instructions. Any other use is deemed
to be improper.
PRODUCT OVERVIEW AND ITEMS SUPPLIED
Sensor
POWER button
Display
Battery compartment
on the back
1 x alcohol tester
2 x AAA battery
1 x wrist strap
1 x operating instructions
Check the product for any trans-
port damage. If you find any
damage, do not use the product
but contact our customer
service department.
Remove any possible films, stick-
ers or transport protection from
the product. Never remove the
rating plate and any possible
warnings!
BEFORE INITIAL USE
1. Insert the batteries supplied into the product (see “ Replacing the
Batteries”).
2. Perform 2 – 3 test measurements before the actual measurement
(see“Use”).
• Optional: Attach the wrist strap to the lug on the top part of the
product.
REPLACING THE BATTERIES
Before inserting the batteries, check whether the con-
tacts in the battery compartment and on the batteries
are clean, and clean them if necessary.
1. Slide open the battery compartment on the back.
2. Remove the used batteries and insert two 1.5 V
batteries (AAA) into the battery compartment. Pay
attention to the correct polarity (+ / –).
3. Close the battery compartment by pushing the
battery compartment cover onto the battery
compartment.
TIPS / NOTICES
• There should be a gap of at least 20 minutes between your last con-
sumption of alcohol and the measurement. Do not eat, smoke or drink
during this time!
• Closed, poorly ventilated rooms and air-conditioned rooms may distort
the measurement result. Perform 2 – 3 measurements if necessary.
• If the product is not used for a prolonged period of time (or before it is
first used), perform 2 – 3 test measurements before the actual measure-
ment.
• Wait approx. 2 – 3 minutes between two measurements.
• Weak batteries may result in a distorted measurement result. Replace
the batteries if the batteries become weaker.
Article number: 16458
Bekijk gratis de handleiding van Easymaxx 16458, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Easymaxx |
| Model | 16458 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 788 MB |
