Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 230 van 264
Troubleshooting
228 Operating Instructions D888 e-con - 00.0 - 12/2023
9310 Error Tape feeder not connected • Check connection cables
• Perform software update
• Replace the control of the tape feeder
9320 Error Tape feeder in lowered
position
• Tape Feeder not in lowered position
9330 Information Material thickness sensor
not connected
• Check connection cables
• Perform software update
• Replace material thickness sensor
9340 Information Remaining thread monitor
not connected
• Check connection cables
• Perform software update
• Replace remaining thread monitor
9341 Information Bobbin control (left) not
connected
• Check connection cables
• Perform software update
• Replace remaining thread monitor
9350 Error Upper machine head pcb is
not connected
• Check connection cables
• Perform software update
• Replace PCB
9351 Error Lower machine head pcb is
not connected
• Check connection cables
• Perform software update
• Replace PCB
9352 Error Right thread tension pcb is
not connected
• Check connection cables
• Perform software update
• Replace PCB
9353 Information Needle thread tension sen-
sor pcb not connected
• Check connection cables
• Perform software update
• Replace thread tension sensor
9354 Error Needle Transport PCB not
connected
• Check connection cables
• Perform software update
• Replace needle transport PCB
9360 Error Edge guide pcb is not
connected
• Check connection cables
• Perform software update
• Replace PCB
9361 Error Edge guide x-axis pcb is not
connected
• Check connection cables
• Perform software update
• Replace PCB
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
