Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 209 van 264
Troubleshooting
Operating Instructions D888 e-con - 00.0 - 12/2023 207
1061 Error Sewing motor overload /
overvoltage /overcurrent
• Check selection of class
• Replace the control
• Replace motor
• Replace encoder
1120 Error Sewing motor initialization
failure
• Perform software update
• Check selection of class
1121 Error Sewing motor watchdog • Perform software update
• Check selection of class
1203 Error Position not reached (during
thread cutting, reversal, etc.)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
1204 Information Position not reached
(during bartack)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
1205 Information Position not reached
(during bartack)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
1206 Information Position not reached
(during bartack)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
1207 Information Position not reached
(during bartack)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
