Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 208 van 264
Troubleshooting
206 Operating Instructions D888 e-con - 00.0 - 12/2023
1004 Error Incorrect sewing motor
direction of rotation
• Replace encoder
• Check motor plug assignment and
change it if necessary
• Check wiring in machine distributor and
change it, if necessary
• Measure motor phases and check for
value
1005 Error Motor blocked • Check for stiff movement
• Replace encoder
• Replace sewing motor
1006 Error Maximum speed exceeded • Replace encoder
• Carry out a reset
• Check class (t 51 04)
1007 Error Error in the reference run • Replace encoder
• Check for stiff movement
1008 Error Encoder error • Replace encoder
1010 Error External synchronizer plug
X5T (Sub-D, 9-pin) not
connected
• Connect cable of external synchronizer to
control, make sure that interface (Sync) is
correct
• Only recommended for machines with
transmission!
1011 Error Encoder Z pulse missing • Switch off the control, use handwheel to
turn, and switch on the control again
• If error is not corrected, check encoder
1012 Error Synchronizer fault • Replace synchronizer
1054 Error Internal short circuit • Replace the control
1055 Error Sewing motor overload • Check for stiff movement
• Replace encoder
• Replace sewing motor
1060 Error Sewing motor overload /
overvoltage /overcurrent
• Check selection of class
• Replace the control
• Replace motor
• Replace encoder
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
