Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 210 van 264
Troubleshooting
208 Operating Instructions D888 e-con - 00.0 - 12/2023
1302 Error Failure with sewing motor
current
• Check Service Stop
• Check for stiff movement
• Replace encoder
• Replace motor
1330 Error No response from sewing
motor
• Perform software update
• Replace the control
2101 Error Stepper card X30 reference
drive timeout
• Check reference sensor
2105 Error Stepper card X30 blockage • Check for stiff movement
2121 Error Stepper card X30 encoder
plug (Sub-D, 9-pin) not
connected
• Connect encoder cable to the control, use
correct connection
2122 Error Stepper card X30 flywheel
position not found
• Check stepper motor 1 for stiff movement
2130 Error Stepper card X30 not
responding
• Perform software update
• Replace the control
2131 Error Stepper card X30
initialization failure
• Perform software update
• Check selection of class
2152 Error Stepper card X30
overcurrent
• Check for stiff movement
2171 Error Stepper card X30 watchdog
(Stitch length)
• Perform software update
• Check selection of class
2172 Error Stepper card X30 motor
overload / overvoltage /over-
current (Stitch length)
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
2173 Error Stepper card X30 sewing
motor encoder not connected
(Stitch length)
• Replace the control
2174 Error Stepper card X30 sewing
motor encoder not initialized
(Stitch length)
• Perform software update
• Check selection of class
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
