Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 156 van 264
Programming Commander DELTA
154 Operating Instructions D888 e-con - 00.0 - 12/2023
5.9.7.4 Setting the Output parameter
This parameter provides virtual outputs that can be assigned cus-
tomer-specific functions. They can be used when customer-specific
applications require a signal from the control of the machine.
This parameter cannot be used unless the virtual outputs have been
assigned to a physical output at the Technician level. This requires
that the parameter Additional I/O Configuration be configured at the
Technician level; for more details, refer to the explanation in the
( Service Instructions).
5.9.8 Setting the Segment End/Seam End parameters
There are various options for setting the Segment End parameters.
The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Icon Parameter Settings
Parameters Seam End
Sewing stop Value range
On/Off
Setting as to what will happen at
the end of a segment/seam.
(see p. 157)
Adjustments for seam end bartack parameters
Bartack at seam end Value range
On/Off
Number of stitches backwards Value range
01 – 50 [stitches]
Number of stitches forward Value range
01 – 50 [stitches]
Number of bartack sections
A bartack consists of several sections.
If the sewing direction is changed, a new
section is started. The number of sections
in a bartack can be set here.
Value range
01 – 99
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
