Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 157 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 155
Stop-Time for direction change
The waiting time at the turning points (e.g. for
a change of sewing direction) is set at this
point. A short waiting time in milliseconds
should ensure consistent seam quality
(ornamental-stitch bartack).
Value range
0000 – 1000 [ms]
Stitch length default
If this function is active, the same needle
stitch length is used for the bartack as
the one set in Manual mode. If this function
is deactivated, a custom input can be
entered.
On/Off
Stitch length of stitches forward
Value range
01.0 – 12.0 [mm]
(depending on subclass)
Stitch length of backwards stitches
Value range
01.0 – 12.0 [mm]
(depending on subclass)
Sewing speed Value range
0050 – 2000 [rpm]
Single stitches per pedal
If this function is activated, each stitch in the
bartack can be sewn individually by pressing
the pedal. This function can only be used
meaningfully if the speed is set very low for
the bartack.
Value range
Off
With bartack speed
With pedal speed
Needle thread tension default
If this function is active, the same needle
thread tension is used for the bartack as the
one set in Manual mode. If this function is
deactivated, a custom input can be entered.
Value range
On/Off
Icon Parameter Settings
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
