Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 155 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 153
5.9.7.3 Parameters Thread tension sensor mode
Switch-off delay Value range
0 – 9999 [mm]
Seams
Input of the number of signal detections
after which the machine is supposed
to continue with the specifically set
parameters.
Value range
1 – 255
Filter stitches
Loosely woven fabric with stitches may
cause the light barrier to wrongly detect
a signal. To prevent this from happening,
you enter the number of filter stitches.
This number represents the minimum
number of stitches with signal detection
following the 1
st
detection of the signal.
Value range
0 – 255
Icon Menu item Setting
Lower limit Value range
0000 – 1100
Upper limit Value range
0000 – 1100
Thread tension warning delay stitches
If the specified maximum of allowed
faulty values is exceeded multiple times
in a row, the software outputs a warning.
Value range
000 – 100
Allowed faulty TT values per seam
If the specified maximum of allowed
faulty values is exceeded in the entire
seam, the software outputs a warning.
Value range
000 – 100
Icon Menu item Settings
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
