Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 102 van 264
Programming Commander DELTA
100 Operating Instructions D888 e-con - 00.0 - 12/2023
Software / Stitch Counter
In Software mode, the bobbin
is monitored by the software
based on the number of stitches
sewn.
Counter Type
4 different counters can be applied.
The following 3 sub-items can be
set for each of the counters.
Value range
A/B/C/D
Counter value
Bobbin supply capacity in stitches.
This is a very variable value, which
depends on the size of the bobbin
and the thickness of the thread.
Value range
00000 - 99999
Sewing stop
Sewing stops and a notice is shown
on the display when the bobbin is
detected to be nearly empty.
If the parameter is not activated,
only the LEDs on the machine arm
give a warning if the bobbin is
empty.
Value range
On/Off
Sewing foot lower position Value range
On/Off
Reset necessary
It is only possible to resume sewing
after changing the bobbin and con-
firming the message on the control
panel.
Value range
On/Off
Menu item Setting option 1 Setting option 2
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
