Durkopp Adler D888 handleiding
Handleiding
Je bekijkt pagina 101 van 264
Programming Commander DELTA
Operating Instructions D888 e-con - 00.0 - 12/2023 99
5.7.3.1 Setting the Bobbin monitor mode parameters
The amount of remaining thread on the bobbin can be monitored
optically or by software using this setting.
Menu item Setting option 1 Setting option 2
Off
Monitor
Monitor mode can only be used
if the additional equipment of
the remaining thread monitor is
present on the machine.
Monitor mode allows for optical
monitoring of the bobbin.
Sewing stop
Sewing stops and a notice is shown
on the display when the bobbin is
detected to be nearly empty.
If the parameter is not activated,
only the LEDs on the machine arm
give a warning if the bobbin is
empty.
Value range
On/Off
Sewing foot lower position Value range
On/Off
t Clean
Duration for which the lens is blown
clear with compressed air.
The process takes place as the
thread is cut.
Value range
0000 – 5000 [ms]
Bekijk gratis de handleiding van Durkopp Adler D888, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D888 |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 27738 MB |
