Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 238 van 286
Troubleshooting
236 Operating Instructions D867 e-con - 00.0 - 06/2023
8136 Error Stepper Puller Top reference
drive failure
• Check for stiff movement
• Replace encoder
• Replace motor
8151 Error Stepper Puller Bottom refer-
ence drive timeout
• Check reference sensor
8154 Error Stepper Puller Bottom step-
per motor blockage
• Check for stiff movement
8156 Error Stepper Puller Bottom
encoder plug not connected
• Connect encoder cable to the control, use
correct connection
8157 Error Stepper Puller Bottom fly-
wheel position not found
• Check stepper motor 1 for stiff movement
8158 Error Stepper Puller Bottom not
responding
• Perform software update
• Replace the control
8159 Error Stepper Puller Bottom not
responding
• Perform software update
• Replace the control
8162 Error Stepper Puller Bottom
overcurrent
• Check for stiff movement
8166 Error Stepper Puller Bottom revo-
lution speed
• Speed of the Stepper Puller Bottom
8170 Error Stepper Puller Bottom
watchdog
• Perform software update
• Check selection of class
8171 Error Stepper Puller Bottom motor
overload/overvoltage/
overcurrent
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
8172 Error Stepper Puller Bottom sewing
motor encoder not connected
• Replace the control
8173 Error Stepper Puller Bottom sewing
motor encoder not initialized
• Perform software update
• Check selection of class
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
