Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 237 van 286
Troubleshooting
Operating Instructions D867 e-con - 00.0 - 06/2023 235
8122 Error Stepper Puller Top sewing
motor encoder not connected
• Replace the control
8123 Error Stepper Puller Top sewing
motor encoder not initialized
• Perform software update
• Check selection of class
8124 Error Stepper Puller Top init posi-
tion not found
• Check for stiff movement
• Replace encoder
• Replace motor
8125 Error Stepper Puller Top not
enabled
• Replace the control
8126 Error Stepper Puller Top overload • Check for stiff movement
• Replace encoder
• Replace motor
8127 Error Stepper Puller Top encoder
failure
• Connect encoder cable to the control
• Use correct connection
8128 Error Stepper Puller Top Current
sensor failure
• Replace the control
8129 Error Stepper Puller Top Incorrect
stepping motor direction of
rotation
• Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine distribu-
tor and change it if necessary
8130 Error Stepper Puller Top reference
drive failure
• Check for stiff movement
• Replace encoder
• Replace motor
8131 Error Stepper Puller Top
overcurrent
• Replace the control
8132 Error Stepper Puller Top parameter
initialization
• Perform software update
• Check selection of class
8133 Error Stepper Puller Top insulation
error
• Check motor phase and PE for low-
impedance connection
• Replace encoder
• Replace motor
8135 Error Stepper Puller Top transport
interval failure
• Perform software update
• Check selection of class
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
