Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 232 van 286

Troubleshooting
230 Operating Instructions D867 e-con - 00.0 - 06/2023
3021 Error U24 V short circuit • Disconnect magnet plug; replace control if
error is not corrected: Replace the control
3022 Error U24 V (I²T) overload • One or several magnets defective
3023 Error U48 V start error • Disconnect magnet plug; replace control if
error is not corrected: Replace the control
3024 Error U48 V short circuit • Disconnect magnet plug; replace control if
error is not corrected: Replace the control
3025 Error U48 V (I²T) overload • One or more magnets defective
3030 Error Motor phase failure • Replace the control
3104 Warning Pedal is not in position 0 • When switching the control on, take your
foot off the pedal
3109 Warning Operation lock • Check tilt sensor on machine
3110 Information Right thread tension magnet
is not connected
• Check the connection of right thread
tension magnet
3111 Information Left thread tension magnet
is not connected
• Check the connection of left thread
tension magnet
3112 Information Reference failure (right)
thread tension
• Restart the machine
3113 Information Reference failure left thread
tension
• Restart the machine
3150 Information Maintenance required • For information on maintenance of the
machine, see the service instructions for
the machine
3161 Information Bobbin winder over
temperature
• The bobbin winder was running too long.
The bobbin winder is deactivated for
30 minutes.
3210 Information Needle thread monitor (right) • Check the needle thread (right).
3211 Information Bobbin thread is broken • Check the bobbin thread
3212 Information Needle thread monitor (right) • Check the needle thread (left).
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |



