Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 231 van 286
Troubleshooting
Operating Instructions D867 e-con - 00.0 - 06/2023 229
2679 Error Stepper card X80 Current
sensor failure (Bottom puller)
• Replace the control
2680 Error Stepper card X80 Incorrect
stepping motor direction of
rotation (Bottom puller)
• Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine distribu-
tor and change it if necessary
2681 Error Stepper card X80 reference
drive failure (Bottom puller)
• Check for stiff movement
• Replace encoder
• Replace motor
2683 Error Stepper card X80 overcurrent
(Bottom puller)
• Replace the control
2684 Error Stepper card X80 parameter
initialization (Bottom puller)
• Perform software update
• Check selection of class
2685 Error Stepper card X80 insulation
error (Bottom puller)
• Check motor phase and PE for low-
impedance connection
• Replace encoder
• Replace sewing motor
2687 Error Stepper card X80 transport
interval failure (Bottom puller)
• Perform software update
• Check selection of class
2688 Error Stepper card X80 reference
drive failure (Bottom puller)
• Check for stiff movement
• Replace encoder
• Replace motor
2901 Error General Reference Timeout
of the stepper motors
• Check reference switch
3010 Error U100 V Start-up error • Disconnect the stepper motor plugs;
if error persists, replace control
3011 Error U100 V short circuit • Disconnect motor plug; replace control if
error is not corrected: Replace the control
3012 Error U100 V (I²T) overload • one or several stepper motors defective
3020 Error U24 V start-up error • Disconnect magnet plug; replace control if
error is not corrected: Replace the control
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
