Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 225 van 286
Troubleshooting
Operating Instructions D867 e-con - 00.0 - 06/2023 223
2377 Error Stepper card X50 overload
(Foot stroke)
• Check for stiff movement
• Replace encoder
• Replace motor
2378 Error Stepper card X50 encoder
failure (Foot stroke)
• Replace encoder
2379 Error Stepper card X50 Current
sensor failure (Foot stroke)
• Replace the control
2380 Error Stepper card X50 Incorrect
stepping motor direction of
rotation (Foot stroke)
• Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine distribu-
tor and change it if necessary
2381 Error Stepper card X50 reference
drive failure (Foot stroke)
• Check for stiff movement
• Replace encoder
• Replace motor
2383 Error Stepper card X50 overcur-
rent (Foot stroke)
• Replace the control
2384 Error Stepper card X50 parameter
initialization (Foot stroke)
• Perform software update
• Check selection of class
2385 Error Stepper card X50 insulation
error (Foot stroke)
• Check motor phase and PE for low-
impedance connection
• Replace encoder
• Replace sewing motor
2387 Error Stepper card X50 transport
interval failure (Foot stroke)
• Perform software update
• Check selection of class
2388 Error Stepper card X50 reference
drive failure (Foot stroke)
• Check for stiff movement
• Replace encoder
• Replace motor
2401 Error Stepper card X60 reference
drive failure (Edge guide)
• Check reference sensor
2405 Error Stepper card X60 stepper
motor blockage (Edge guide)
• Check for stiff movement
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
