Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 224 van 286
Troubleshooting
222 Operating Instructions D867 e-con - 00.0 - 06/2023
2301 Error Stepper card X50 reference
drive timeout (Foot stroke)
• Check reference sensor
2305 Error Stepper card X50 stepper
motor blockage
• Check for stiff movement
2321 Error Stepper card X50 encoder
plug (Sub-D, 9-pin) not
connected
• Connect encoder cable to the control,
use correct connection
2322 Error Stepper card X50 flywheel
position not found
• Check stepper motor 1 for stiff movement
2330 Error Stepper card X50 not
responding
• Perform software update
• Replace the control
2331 Error Stepper card X50
initialization failure
• Perform software update
• Check selection of class
2352 Error Stepper card X50
overcurrent
• Check for stiff movement
2371 Error Stepper card X50 watchdog
(Foot lifting)
• Perform software update
• Check selection of class
2372 Error Stepper card X50 motor
overload/overvoltage/over-
current (Foot stroke)
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
2373 Error Stepper card X50 sewing
motor encoder not con-
nected (Foot stroke)
• Replace the control
2374 Error Stepper card X50 sewing
motor encoder not initialized
(Foot stroke)
• Perform software update
• Check selection of class
2375 Error Stepper card X50 init position
not found (Foot stroke)
• Check for stiff movement
• Replace encoder
• Replace motor
2376 Error Stepper card X50 not
enabled (Foot stroke)
• Replace the control
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
