Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 223 van 286
Troubleshooting
Operating Instructions D867 e-con - 00.0 - 06/2023 221
2275 Error Stepper card X40 init position
not found (Foot lifting)
• Check for stiff movement
• Replace encoder
• Replace motor
2276 Error Stepper card X40 not
enabled (Foot lifting)
• Replace the control
2277 Error Stepper card X40 I²t
(Foot lifting)
• Check for stiff movement
• Replace encoder
• Replace motor
2278 Error Stepper card X40 encoder
failure (Foot lifting)
• Replace encoder
2279 Error Stepper card X40 Current
sensor failure (Foot lifting)
• Replace the control
2280 Error Stepper card X40 Incorrect
stepping motor direction of
rotation (Foot lifting)
• Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine distribu-
tor and change it if necessary
2281 Error Stepper card X40 reference
drive failure (Foot lifting)
• Check for stiff movement
• Replace encoder
• Replace motor
2283 Error Stepper card X40 overcur-
rent (Foot lifting)
• Replace the control
2284 Error Stepper card X40 parameter
initialization (Foot lifting)
• Perform software update
• Check selection of class
2285 Error Stepper card X40 insulation
error (Foot lifting)
• Check motor phase and PE for low-
impedance connection
• Replace encoder
• Replace sewing motor
2287 Error Stepper card X40 transport
interval failure (Foot lifting)
• Perform software update
• Check selection of class
2288 Error Stepper card X40 reference
drive failure (Foot lifting)
• Check for stiff movement
• Replace encoder
• Replace motor
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
