Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 226 van 286
Troubleshooting
224 Operating Instructions D867 e-con - 00.0 - 06/2023
2421 Error Stepper card X60 encoder
plug (Sub-D, 9-pin) not
connected
• Connect encoder cable to the control, use
correct connection
2422 Error Stepper card X60 flywheel
position not found
• Check stepper motor 1 for stiff movement
2430 Error Stepper card X60 not
responding
• Perform software update
• Replace the control
2431 Error Stepper card X60
initialization failure
• Perform software update
• Check selection of class
2471 Error Stepper card X60 Watchdog
(Edge guide)
• Perform software update
• Check selection of class
2472 Error Stepper card X60 motor
overload/overvoltage/over-
current (Edge guide)
• Check selection of class
• Replace the control
• Replace encoder
• Replace stepper motor
2473 Error Stepper card X60 Sewing
motor encoder not connected
(Edge guide)
• Replace the control
2474 Error Stepper card X60 sewing
motor encoder not initialized
(Edge guide)
• Perform software update
• Check selection of class
2475 Error Stepper card X60 init posi-
tion not found (Edge guide)
• Check for stiff movement
• Replace encoder
• Replace motor
2476 Error Stepper card X60 not
enabled (Edge guide)
• Replace the control
2477 Error Stepper card X60 overload
(Edge guide)
• Check for stiff movement
• Replace encoder
• Replace motor
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
