Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 219 van 286
Troubleshooting
Operating Instructions D867 e-con - 00.0 - 06/2023 217
1060 Error Sewing motor overload /
overvoltage /overcurrent
• Check selection of class
• Replace the control
• Replace motor
• Replace encoder
1061 Error Sewing motor overload /
overvoltage /overcurrent
• Check selection of class
• Replace the control
• Replace motor
• Replace encoder
1120 Error Sewing motor initialization
failure
• Perform software update
• Check selection of class
1121 Error Sewing motor watchdog • Perform software update
• Check selection of class
1203 Error Position not reached (during
thread cutting, reversal, etc.)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
1204 Information Position not reached
(during bartack)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
1205 Information Position not reached
(during bartack)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
1206 Information Position not reached
(during bartack)
• Check the controller settings and change
them if necessary (e.g. thread trimmer
setting, belt tension, etc.)
• Check position thread lever at top dead
center
Code Type Possible cause Corrective
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
