Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 162 van 286
Programming Commander DELTA
160 Operating Instructions D867 e-con - 00.0 - 06/2023
5.10.7.4 Setting the Outputs (Output) parameter
This parameter provides virtual outputs that can be assigned cus-
tomer-specific functions. They can be used when customer-specific
applications require a signal from the control of the machine.
This parameter cannot be used unless the virtual outputs have
been assigned to a physical output at the Technician level. This
requires that the parameter Additional I/O Configuration
be configured at the Technician level; for more details, refer to the
explanation in the Service Instructions.
5.10.8 Setting the Segment End/Seam End parameters
There are various options for setting the Segment End parameters.
The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Icon Parameter Setting
Seam end parameters
Sewing stop Value range
On/Off
Setting as to what will happen at
the end of a segment/seam.
(see p. 163)
Adjustments for seam end bartack parameters
Bartack at seam end Value range
On/Off
Number of stitches backwards Value range
01 - 50
Number of stitches forward Value range
01 - 50
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
