Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 157 van 286
Programming Commander DELTA
Operating Instructions D867 e-con - 00.0 - 06/2023 155
Needle position
Position of the needle when sewing
stops.
Value range
On/Off
Sewing foot lift at stop Value range
On/Off
Height of sewing foot lift at
stop
Value range
00 – 20 [mm]
(depending on subclass)
Backwards
When the parameter is activated,
the section is sewn backwards.
Value range
On/Off
Puller
(optional additional equipment)
The puller supports the transport of the
sewing material. The feed of the two
rollers is calculated automatically
based on the stitch length of the
machine. An adjustment may be nec-
essary depending on the application.
The rollers of the puller can be
adjusted separately. The input is in
percent: a positive value increases the
roller feed while a negative value
reduces the feed.
(Access only after activation in the
machine configuration)
Value range
On/Off
(see p. 157)
Gap
(optional additional equipment)
The edge guide helps to precisely
position the sewing material. The value
set indicates the distance between the
needle and edge guide/material edge.
(Access only after activation in the
machine configuration)
Value range
08.0 - 45.0 [mm]
Icon Parameter Setting
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
