Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 156 van 286
Programming Commander DELTA
154 Operating Instructions D867 e-con - 00.0 - 06/2023
5.10.7 Setting the Segment parameters
There are various options for setting the parameters in the seg-
ment. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Icon Parameter Setting
Seam Parameter
Stitch length Value range
0.10 - 06.0 [mm]
(depending on the sewing equipment
and the subclass)
Needle thread tension Value range
01 - 99
Sewing foot pressure Value range
01 - 20
Sewing foot stroke Value range
1.0 – 9.0 [mm]
Seam length in segment
or
Number of stitches in segment
You can set the active option at the
Technician level Machine config-
uration > Seam segment mode.
The s.p.m. option is set at the factory.
The display remains after the thread
has been cut, while counting/measur-
ing will begin when sewing starts
again.
Max. Speed
It is possible to reduce the maximum
sewing speed at this point. The maxi-
mum sewing speed can be set in the
software at the Technician level.
Value range
0050 – 3800 [rpm]
(depending on subclass)
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
