Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 136 van 286
Programming Commander DELTA
134 Operating Instructions D867 e-con - 00.0 - 06/2023
Program Cycle
The program is executed as a loop,
which is useful, for instance, for orna-
mental stitch seams.
You select the start segment and the
end segment from a program and
define how often you wish the selected
segments to be sewn.
On/Off
Start Segment
Value range 00 – 30
(0 = the cycle starts with the first
segment)
End Segment
Value range 00 – 30
(0 = the cycle ends with the last
segment)
Repetitions
Value range 00 – 99
(0 = the cycle continues until the next
segment is activated manually)
Main Parameter
Needle thread clamp
The needle thread clamp is closed at
the 1
st
stitch of the seam to ensure that
the needle thread lies on the underside
of the sewing material
Value range
On/Off
Needle cooling Value range
On/Off
Bobbin monitor mode (see p. 138)
Counter Mode
Daily piece counter, can be set to count
either up or down.
Total/Up/Down
Reset
When the daily piece counter is acti-
vated, it must be reset once after
entering a value to ensure it counts
correctly.
Icon Parameter Setting
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
