Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 137 van 286
Programming Commander DELTA
Operating Instructions D867 e-con - 00.0 - 06/2023 135
Point position
The distance of the needle from the
material can be adjusted to allow pre-
cise positioning of the sewing material
when starting sewing. The value
entered corresponds to the degree
number on the handwheel.
000 - 359 [°]
Material thickness detection
Material thickness detection Value range
On/Off
(see p. 141)
Sewing foot stroke The sewing foot stroke can be adjusted
to different material thicknesses by the
software.
Stitch length The stitch length changes slightly
depending on the material thickness.
For this reason, the stitch length can
be adjusted to different material thick-
nesses by the software.
Needle thread tension Depending on the material thickness,
the needle thread tension can
be adjusted to different material
thicknesses by the software.
Sewing foot pressure The sewing foot pressure can
be adjusted to different material
thicknesses by the software.
Max. sewing speed The maximum sewing speed can
be adjusted to different material
thicknesses by the software.
Correction speed effect
Correction speed effect Value range
On/Off
(see p. 147)
Icon Parameter Setting
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
