Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 135 van 286
Programming Commander DELTA
Operating Instructions D867 e-con - 00.0 - 06/2023 133
5.10.5 Setting program parameters
There are various options for setting the cross-program parame-
ters. The following table lists all possible options.
Settings that are more complex and therefore require further
explanation are described in more detail after the table.
Icon Parameter Setting
Program activation
Scan code
(Function only available with activated
scanner)
p. 136
Additional values (+)
Additional value stitch
length (+)
The 2
nd
value for the stitch length can
be switched on using a button on the
push button panel or the tile on the
control panel.
Value range
0.10 - 6.00
(depending on sewing equipment and
subclass)
Additional value sewing foot
stroke (+)
The 2
nd
value for the sewing foot
stroke can be switched on using a but-
ton on the push button panel, the knee
button or the tile on the control panel.
Value range
01.0 - 09.0 [mm]
Additional value needle
thread tension (+)
The 2
nd
value for the needle thread
tension can be switched on using a
button on the push button panel or the
tile on the control panel.
Value range
01 - 99
Gap (2
nd
value)
The 2
nd
value for the gap can be
switched on using a button on the push
button panel or the tile on the control
panel.
Value range
08.0 -45.0 [mm]
Program Cycle
Next program
A subsequent program can be defined.
Input via program number.
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
