Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 108 van 286
Programming Commander DELTA
106 Operating Instructions D867 e-con - 00.0 - 06/2023
Setting options Needle thread tension
Menu item Setting 1 Setting 2
Linear
absolute
Needle thread tension
Value range
00–99
Maximum needle thread
tension reached at the
upper material thickness
limit.
Min. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness at which
the increase in needle
thread tension should start.
Max. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness up to
which the increase in nee-
dle thread tension should
occur.
Linear
with
offset
Offset
Value range
-99–99
Difference up to maximum
needle thread tension
reached at the upper mate-
rial thickness limit.
Min. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness at which
the increase in needle
thread tension should start.
Max. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness up to
which the increase in nee-
dle thread tension should
occur.
2.On/Off Min. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness from
which the 2
nd
needle
thread tension should be
used.
2.On Min. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness from
which the 2
nd
needle
thread tension should be
used.
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
