Durkopp Adler D867 e-con handleiding
Handleiding
Je bekijkt pagina 107 van 286
Programming Commander DELTA
Operating Instructions D867 e-con - 00.0 - 06/2023 105
Setting options Stitch length
Menu item Setting 1 Setting 2
Linear
with
offset
Offset
Value range
-50–50[%]
Difference up to maximum
stitch length variation
reached at the upper
material thickness limit.
Min. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness at which
the increase/reduction of
the stitch length should
start.
Max. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness up to
which the increase/reduc-
tion of the stitch length
should occur.
2.On/Off Min. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness from
which the 2
nd
stitch length
should be used.
2.On Min. material
thickness
Value range
00.0 – 10.0 [mm]
Material thickness from
which the 2
nd
stitch length
should be used.
Bekijk gratis de handleiding van Durkopp Adler D867 e-con, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Durkopp Adler |
| Model | D867 e-con |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 32197 MB |
