Draper D20 98501 handleiding
Handleiding
Je bekijkt pagina 7 van 20
– 7 –
5. HEALTH AND SAFETY INFORMATION
Wait for the machine to stop. Unless the machine is tted with a safety brake, some parts may
continue to move due to momentum. Wait for all parts to stop, then unplug it from the power
supply before making any adjustments, carrying out maintenance operations or just nishing
using the tool.
Remove and check setting tools. Some machinery requires the use of additional tools or
keys to set, load or adjust the power tool. Before starting the power tool always check to make
certain they have been removed and are safely away from the machine.
Prevent unintentional starting. Before plugging any machine in to the power supply, make
sure the switch is in the OFF position. If the machine is portable, do not hold the machine near
the switch and take care when putting the machine down, that nothing can operate the switch.
Carefully select an extension lead. Some machines are not suitable for use with extension
leads. If the tool is designed for use outdoors, use an extension lead also suitable for that
environment. When using an extended lead, select one capable of handling the current (amps)
drawn by the machine in use. Fully extend the lead regardless of the distance between the
power supply and the tool. Excess current (amps) and a coiled extension lead will both cause
the cable to heat up and can result in re.
Concentrate and stay alert. Distractions are likely to cause an accident. Never operate a
power tool if you are under the inuence of drugs (prescription or otherwise), including alcohol
or if you are feeling tired. Being disorientated will result in an accident.
Have this tool repaired by a qualied person. This tool is designed to conform to the relevant
international and local standards and as such should be maintained and repaired by someone
qualied, using only original parts supplied by the manufacturer. This will ensure the tool
remains safe to use.
5.2 RESIDUAL RISK
Important: Although the safety instructions and operating manuals for our tools contain
extensive instructions of safe working with power tools, every power tool involves a certain
residual risk which can not be completely excluded by safety mechanisms. Power tools must
therefore always be operated with caution!
5.3 SAFETY INSTRUCTIONS FOR MAINS POWERED CHARGERS
& BATTERY PACKS
– The charger is for indoor use only.
– Prior to plugging the charger in to the supply, check that the plug and the cable are in
good repair. If either are damaged, have the defective item replaced immediately by a
suitably qualied person. If the casing of the battery charger is damaged, it is good policy
to have the charger checked over by a suitably qualied person.
– Only use a correctly rated mains outlet to provide power, do not plug into site generators,
attach to engine generators or D.C. sources. Do not use a mains socket outlet that is not
switched.
– Use the correct Draper charger in conjunction with it’s corresponding battery pack
(consult the Draper website for more information or to nd your local stockist).
– Do not charge any other batteries with Draper chargers. Any other application is
considered misuse.
– Do not attempt to charge battery packs that are too hot (over 30ºC) or too cold (under
5ºC), if these conditions apply set the battery pack aside to “normalise” before
proceeding with the charging operation.
Bekijk gratis de handleiding van Draper D20 98501, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Draper |
| Model | D20 98501 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3117 MB |
