Draper D20 98501 handleiding

20 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 6 van 20
– 6 –
5. HEALTH AND SAFETY INFORMATION
5.1 GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE
When using any type of power tool there are steps that should be taken to make sure that you,
as the user, remain safe.
Common sense and a respect for the tool will help reduce the risk of injury.
Read the instruction manual fully. Do not attempt any operation until you have read and
understood this manual.
Most important you must know how to safely start and stop this machine, especially in an
emergency.
Keep the work area tidy and clean. Attempting to clear clutter from around the machine
during use will reduce your concentration. Mess on the oor creates a trip hazard. Any liquid
spilt on the oor could result in you slipping.
Find a suitable location. If the machine is bench mounted the location should provide good
natural light or articial lighting as a replacement. Avoid damp and dust locations as it will have
a negative eect on the machine’s performance. If the machine is portable do not expose the
tool to rain. In all cases do not operate power tools near any ammable materials.
Keep bystanders away. Children, onlookers and passers by must be restricted from entering
the work area for their own protection. The barrier must extend a suitable distance from the
tool user.
Unplug and house all power tools that are not in use. A power tool should never be left
unattended while connected to the power supply. They must be housed in a suitable location,
away locked up and from children. This includes battery chargers.
Do not overload or misuse the tool. All tools are designed for a purpose and are limited to
what they are capable of doing. Do not attempt to use a power tool (or adapt it in any way)
for an application it is not designed for. Select a tool appropriate for the size of the job.
Overloading a tool will result in tool failure and user injury. This covers the use of accessories.
Dress properly. Loose clothing, long hair and jewellery are all dangerous because they can
become entangled in moving machinery. This can also result in parts of body being pulled into
the machine. Clothing should be close tted, with any long hair tired back and jewellery and
neck ties removed. Footwear must be fully enclosed and have a non-slip sole.
Wear personal protective equipment (PPE). Dust, noise, vibration and swarf can all be
dangerous if not suitably protected against. If the work involving the power tool creates dust
or fumes wear a dust mask. Vibration to the hand, caused by operating some tools for longer
periods must be protected against. Wear vibration reducing gloves and allow long breaks
between uses. Protect against dust and swarf by wearing approved safety goggles or a face
shield. These are some of the more common hazards and preventions however, always nd
out what hazards are associated with the machine/work process and wear the most suitable
protective equipment available.
Do not breathe contaminated air. If the work creates dust or fumes connect the machine
(if possible) to an extraction system either locally or remotely. Working outdoors can also help
if possible.
Move the machine as instructed. If the machine is hand held, do not carry it by the power
supply cable. If the product is heavy, employ a second or third person to help move it safely or
use a mechanical device. Always refer to the instructions for the correct method.
Do not overreach. Extending your body too far can result in a loss of balance and you falling.
This could be from a height or onto a machine and will result in injury.
Maintain your tools correctly. A well maintained tool will do the job safely. Replace any
damaged or missing parts immediately with original parts from the manufacturer. As
applicable keep blades sharp moving parts clean, oiled or greased handles clean and
emergency devices working.

Bekijk gratis de handleiding van Draper D20 98501, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkDraper
ModelD20 98501
CategorieStofzuiger
TaalNederlands
Grootte3117 MB