Dotco 10N2080-01 handleiding

Handleiding

12345678910111213141516/ 16

Afdrukken

Je bekijkt pagina 6 van 16

6

P2644MA | REV A l 2025-04

Apex Tool Group

1

EN

• Ensure the working area is kept clear of unauthorized

personnel to prevent injury.

• Nearby individuals must wear appropriate hearing and

eye protection.

• Verify that ventilation and dust extraction systems are

adequate for the workspace.

• Provide a designated stand or safe location for plac-

ing the tool when not in use.

• If necessary, work within a sealed-off area with pro-

tective barriers to mitigate the risk of debris or broken

discs flying off.

7 Dust and fume hazards

The following applies to all tools:

• Dust and fumes generated when using the tool can

cause ill health (for example cancer, birth defects,

asthma and/or dermatitis); risk assessment and im-

plementation of appropriate controls for these hazards

are essential.

• Risk assessment should include dust created by the

use of the tool and the potential for disturbing existing

dust.

• Operate and maintain the tool as recommended in

these instructions, to minimize dust or fume emis-

sions.

• Direct the exhaust so as to minimize disturbance of

dust in a dust-filled environment.

• Where dust or fumes are created, the priority shall be

to control them at the point of emission.

• All integral features or accessories for the collection,

extraction or suppression of airborne dust or fumes

should be correctly used and maintained in accord-

ance with the manufacturer's instructions.

• Select, maintain and replace the consumable/inserted

tool as recommended in the instructions, to prevent

an unnecessary increase in dust or fumes.

• Use respiratory protection in accordance with the em-

ployer's instructions and as required by occupational

health and safety regulations.

• Working in certain materials creates emission of dust

and fumes, causing a potentially explosive environ-

ment.

8 Noise hazards

The following applies to all tools:

• Exposure to high noise levels can cause permanent,

disabling hearing loss and other problems, such as

tinnitus (ringing, buzzing, whistling or humming in the

ears). Therefore, risk assessment and implementation

of appropriate controls for these hazards are essen-

tial.

• Appropriate controls to reduce the risk may include

actions such as damping materials to prevent work

pieces from “ringing”.

• Use hearing protection in accordance with employer's

instructions and as required by occupational health

and safety regulations.

• Operate and maintain the tool as recommended in the

instruction handbook, to prevent an unnecessary in-

crease in the noise level.

• Select, maintain and replace the consumable/inserted

tool as recommended in the instruction handbook, to

prevent an unnecessary increase in noise.

• Always ensure that the tools silencer is in place and in

good working order when the tool is being operated.

2.7 Additional Safety Instructions for

Pneumatic Power Tools

• Air under pressure can cause severe injury:

- always shut off air supply, drain hose of air pres-

sure and disconnect tool from air supply when not

in use, before changing accessories or when

making repairs;

- never direct air at yourself or anyone else.

• Whipping hoses can cause severe injury. Always

check for damaged or loose hoses and fittings.

• Whenever universal twist couplings (claw couplings)

are used, lock pins shall be installed and whipcheck

safety cables shall be used to safeguard against pos-

sible hose-to-tool and hose-to-hose connection fail-

ure.

• Do not exceed the maximum air pressure stated on

the tool.

• Never carry an air tool by the hose.

• Do not exceed the maximum air pressure of 6.3 bar /

90 psig.

3 Items Supplied

• Correct tool

• Angle head grease

• Grease gun

• Wrenches

• Instruction manual

• EU Declaration of conformity

• Warranty

• UKCA Declaration of conformity

4 Transport / Storage

► Transport or store the product in its original packag-

ing. The packaging is recyclable.

► If the packaging is damaged, check the part for visible

damage. Inform the carrier and, if necessary, your

Sales & Service Center.

► Lubricate the tool always before storage and when

being returned to service.

► Store the tool in a clean and dry environment.

12345678910111213141516/ 16

Bekijk gratis de handleiding van Dotco 10N2080-01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Dotco (Niet gecategoriseerd)

Handleiding bekijken

Dotco 10L2565-01

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd