Dometic DG3 handleiding
Handleiding
Je bekijkt pagina 7 van 16
EN
No. Name Description
3 Flywheel
speed arrow
Shows if the flywheel speed is increasing (up arrow)
or decreasing (down arrow).
4 Notification
icon
A yellow or red dot in the bell icon means there is an
active fault. Touch the icon to see information about
the fault and what actions you should take. Available
only on the standard interface.
5 Settings icon Touch to go to the settings screen, from which you
can change the screen color theme. You can also
access information pages about the gyroscopic sta-
bilizer. Available only on the standard interface.
6 Power button Starts and stops the gyro. The button background is
blue when power is on, gray when off.
7 Stabilize but-
ton
Starts and stops the stabilize function. The button
background is blue when the stabilize function is
on, gray when off. When the stabilize function is
on, the boat icon will pulse if the flywheel has not
reached the minimum stabilizing speed.
Settings page and screen navigation
Signals
Theme:
Faults
Network
Settings
About
1
2 3
5
Winterize System
Enable technician menu...
Black
4
No. Description
These buttons navigate to different information and diagnostic
pages. The active page is highlighted.
Signals Shows operating data about the gyro, including total
running hours, flywheel speed, coolant temperature, and
battery voltage and current
Faults Opens the fault page. See Fault page on page7
Network Shows devices on the network and their software version
1
About Information about the gyro and a QR code link to down-
load the operating manual
2 Change the theme color for the user interface
3 Access the technician menu (passcode required)
4 Activate the winterizing function
5 The back arrow returns to the main control screen
NOTE Use the QR code on the "About" page to
download a copy of the operating manual onto your
mobile device.
Fault page
Touch the notification icon to open the fault page, which displays
a history of system faults. A sample is shown in figure Fig.
on page7
Signals
Timestamp
2025-04-30 at 17:06:07
2024-05-12 at 08:54:57
System Time
122h 06m 56s
00h 54m 35s
Source
GCU
PCU
Code
4
1
State
active
occured
Description
Description #1
Description #3
Faults
Network
Settings
About
1
2
3
4 5 6 7
8
No. Description
1 Navigation buttons — the active page is highlighted in blue
2 The calendar date and clock time when the fault was triggered
3 The time the fault was triggered, given as the elapsed time since
the control module sending the fault was first powered on
4 Shows which control module triggered the fault
5 Shows the fault code
6 Shows whether the fault is active or if the fault ocurred in the past
7 Gives a description of the fault to help with troubleshooting
8 The back arrow returns to the main control screen
7.3.1 Add a Garmin overlay
If you are using a Garmin
®
chartplotter, you can add a gyro user
interface to the top or bottom bar of your most frequently used
screen.
1.
Open the Garmin
®
screen you'd like to add the gyro user
interface to.
2.
On the Garmin
®
display: Options > Edit overlays >
Top bar (or bottom bar) > Gyro
8 Using the device
8.1 Pre-start system inspection
Before every use of the gyro:
7
Bekijk gratis de handleiding van Dometic DG3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Dometic |
| Model | DG3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2069 MB |
